The IOT-Based Hydrogen Sulfide Monitoring at PT. Pertamina Geothermal Energy on Lumut Balai Area
Main Article Content
Abstract
Geothermal Power Plants produce electricity energy from geothermal sources found in geothermal wells. Inside the geothermal well there is H2S content which is a toxic gas that can cause death to humans when human exposed the H2S content for 500-700 ppm within 30-60 minutes. Based on several literacies, in this research, H2S sensor type MQ-136 was used to monitoring H2S content in the geothermal environment. The Internet of Things system is used to read data parameters as a tool to display PPM values on the LCD of the transmitter and receiver device, as well as Adafruit IO website for reading parameter sensor data.. To transmit data from the transmitter to the receiver, Lora Ra-01 AI Thinker is used. The focus of this research is to be able to remotely monitor H2S content through the Adafruit IO website, the highest data was read is 0.54 ppm and the lowest at 0 ppm. This equipment will give "BHY" signal on the LCD display on the transmitter and from the Adafruit IO website it will send a notification "hazard of high ppm H2S" to mobile phones who installed IFTTT application if the H2S concentration was read for 10 ppm or higher, so that workers avoid being exposed to high concentrations of H2S when they want to monitor the parameters in the Geothermal well area.
Downloads
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to journal Tech-E, Universitas Buddhi Dharma as publisher of the journal.
Copyright encompasses exclusive rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms and any other similar reproductions, as well as translations. The reproduction of any part of this journal, its storage in databases and its transmission by any form or media, such as electronic, electrostatic and mechanical copies, photocopies, recordings, magnetic media, etc. , will be allowed only with a written permission from journal Tech-E.
journal Tech-E, the Editors and the Advisory Editorial Board make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in the journal Tech-E, Universitas Buddhi Dharma are sole and exclusive responsibility of their respective authors and advertisers.
Abstract views: 198 / PDF downloads: 141